Project 525EXC - DirtTricks Adjustable Offset Triple Clamps - - Dirtbike at Off-Road.com
Dirtbike »
Project 525EXC - DirtTricks Adjustable Offset Triple Clamps

Source: Dirtbike at Off-Road.com

The 2004 KTM 525EXC comes with the 18mm offset triple clamps straight from the factory. KTM must be on to something because the ?04 525EXC we rode turned better than the 2002 520 or our 2003 525. Lucky for us - Greg Burns of DirtTricks supplied us with a set of adjustable offset triple clamps to make our bike turn like it should. The clamps run $339 with the 14mm/20mm insert; for $69 more you can also get the extra 16mm/18mm insert to give you the full range of adjustability - 14mm through 20mm.

Greg is a mechanical engineer and has raced off road since 1973. He has owned a production CNC shop for 20 years (Burns Machinery Inc) with a primary business of producing racecar suspension components for another company, as well as numerous space shuttle components (but no O-rings or fuel tank foam). DirtTricks sells a variety of items, but their largest selling components are Ironman Sprockets, DirtTricks damper mounting hardware, and the new DirtTricks composite hand guards.

 Installing the DirtTricks clamps requires the use of a press but the installation is much quicker than I expected. First you must remove the stock triple clamps from the bike and press out the stem and bearing. When pressing out the stem, make sure you support the lower triple clamp around the stem. If you don?t provide support to this area the clamp can flex enough to actually snap.

After removing the stock stem and bearing, support the DirtTricks lower clamp and press the stem back in. This sounds much more difficult than it is, it really only took less than 10 minutes to do the entire thing. After you have the stem pressed into the lower clamp you need to press on the bearing. I have heard of people just using a rubber mallet and a piece of pipe with the same diameter as the inner race on the bearing. It doesn?t require much force, but we used the press and some pipe to drop ours right in place.

The next step is to install the triple clamps back on the bike and remove the play from the bearings. Since the clamps are new it required a bit of tapping with the rubber mallet to get everything in place. Once everything is snugged up, you choose which offset you want to run. The inserts are oval and each one has two settings depending on which way you put them in the clamps. You must also do a little trimming of the front fender, as the clamps are a little wider to accommodate the inserts. Greg recommends a dremmel tool but since I don?t have one I just took my time and played whittler with a few razor blades.

 As mentioned, we first put in the stock 20mm offset to allow an unbiased test of the suspension. Later I changed the offsets to 14mm - right at camp, in about 15 minutes, by myself. The change requires you put the bike on a stand and loosen the fork clamp bolts. Once the front tire and forks drop, you can remove the lower inserts. On the top clamp we removed the handlebars, popped out the insert and turned it to the 14mm position. We just used our foot to raise the front wheel off the ground and guide the forks back into the clamps.

 Back on the trails, the bike carved corners like it was on rails with the 14mm inserts. I really noticed the difference when coming into turns a little hot and trying to hit the brakes to recover. With the stock 20mm, the bike wanted to continue sliding off the trail; but with the 14mm offset the bike recovered very quickly. For the tight and twisty trails without rocks and big obstacles, the 14s were great. When we hit the higher speed

rocky jeep roads, the bike started to wander a little too much compared to stock. Coming around one flat turn I got on the gas a little early and bike almost did a 180 it turned so sharp! Luckily a little tap on the brakes and quick burst of the throttle, and I was back on track - narrowly avoiding a high side.

Since I like to ride more than work on bikes I haven?t had a chance to try out the 16mm/18mm insert. A pretty good guess would be to run the 14mm offset when the conditions are really tight and fairly smooth. For Kennedy Meadows I think I would run the 16mm next time due to all the rocks that try and send the bike off course. For desert the 18mm will probably be the way to go, since I like a quick turning bike but still want some stability. Stay tuned for the future review of the 16mm and 18mm inserts in different riding conditions. Overall I really like the ability to quickly change the handling of the motorcycle, and the quality of the DirtTricks clamps is top notch.

 DirtTricks Update - January 2004

It has been a few months now since our initial install and review of the Dirt Tricks adjustable offset triple clamps. The clamps have been holding up beautifully on the 525 and we get a lot of questions and comments about them when out riding. People usually spot the inserts because they are a different color from the clamps. Once we explain that you can pop the inserts out and insert different offsets they are amazed at how simple and effective the idea is.

From our original test we initially ran the stock 20mm inserts for a baseline and then installed the 14mm inserts to ride the single tracks of Southern California. After running the 14mm inserts for a few rides we realized it is great for those smooth twisty trails but tends to steer too quick and cause the bike to deflect when the trail roughens up. Since that last review desert season has arrived and we have put in a number of days just play riding. For the desert the 18mm inserts seem to be the best all-around insert for our casual to semi-fast pace. The 18mm inserts result in less deflection of the bike in the whoops over the 14mm inserts. They also increase the quickness and the ability to recover from a nearly blown corner over the 20mm inserts.

When the weather starts to warm-up a bit and we head back into the mountains the 16mm inserts are going in. From our experience with running the 14s and 18s the 16mm inserts should be a great choice for the tight, but still rough and rocky, single-track trails we normally ride. Until then we are happy with the 18mm inserts and look forward to more complements and questions out on the trail about the Dirt Tricks adjustable offset triple clamps.


Follow us on Twitter at www.twitter.com/OffRoadDotCom

Contact:
DirtTricks.com
2236 Park Place
Suite C,
Minden, NV 89423
Phone: 775-783-1750
Fax: 775-782-2867
525EXC Project
Project Updates and Product Review: BulletProof DesignsBilletRadiator Guards
Ironman Sprockets
Project 525EXC - Novation Update Adjustable Progressive Dampening System
Spare Tube Bag
StompGrip Traction Pads Revisited
Oil Change - Tips and Tricks
Fastway FIT Evolution II Footpeg System - F3 Series
Fastway FIT Handguard System - Damper Mount
DirtTricks Adjustable Offset Triple Clamps
FMF Q and Powerbomb Header System
post a comment
Your email address will NOT be published.
appears with your comment
read our privacy policy
Note: does not support HTML
All comments submitted are subject to review, and may be delayed before posting. We reserve the right not to post comments.
Untitled Document
Sponsored Links
Off-Road Videos -
Check out over ten years of extreme 4x4 action, product testing and the Off Road Nation at play. Baja racing to rock crawling, ATVs in the sand to motorcycles in the dirt, it's all here. Rate them, share them and upload your own.
ATV Reviews -
Honda, Suzuki, Yamaha, Polaris, Kawasaki, Can-Am. First rides to long-term tests, check out the latest in ATVs, UTVs and Side-by-Side vehicles of every make and model. Read expert opinions and follow custom project vehicles.
Axxxtion Sports.....
Axxxtion Sports is heating things up with their 2010 Winter Heat snowmobile calendar! Simply Sexy!

Enewsletters

Stay on Top of All the Action:
Sign up for Off-Road.com's Enewsletters

Source: Dirtbike at Off-Road.com,
Click here