I have a 1990 CR 500 and i bought it about 3 years ago. I found out the engine case was cracked, and it was welded. From it being welded it warped the case. The bike wont start due to the cases being warped. I have been looking for engine cases for this bike, and i can not find them. I would like to know if there is any way u would be able to locate engine cases for my 1990 cr 500. Please email me back at brenasmom2001@hotmail.com thank you
josh / Altoona, UNITED STATES
Posted Sep 09 2007 12:49AM
I have a 1990 CR 500 and i bought it about 3 years ago. I found out the engine case was cracked, and it was welded. From it being welded it warped the case. The bike wont start due to the cases being warped. I have been looking for engine cases for this bike, and i can not find them. I would like to know if there is any way u would be able to locate engine cases for my 1990 cr 500. Please email me back at brenasmom2001@hotmail.com thank you
bob500 /
Posted Jun 01 2008 02:22PM
1989-1990 cr 500 fork problems ==== have my wrists aching!need some plushness in the initial travel w/ less dive under braking to help hold off the usual cr 500 headshake.This only occurs in the 500's under decceleration through heavy woops @! 60+ mph, not the best time for serious tankslappers on a 500! Springs or valving changes?, I really need some good advice here ,as I desert race on a budget and am trying to choose between progressive springs or oil flow changes.
Posted Sep 09 2007 12:47AM