I have a 1997 KX 80 and it is leaking out of the muffler and out of the airbox is this normal or what can i do to stop the leaking?
HemiRemington / Saskatoon, ZZ, CANADA
Posted Aug 12 2007 11:54AM
I have me a 96 CR125 with a FMF fatty Pipe and a Boyesen Rad Valve and I have the needle at 3 with a 162 main jet as per Boyesen and air screw 2 turns and run at 32:1. i recently rebuilt the top end but constantly foul plugs. Could setting the powervalve wrong have an effect on running too rich since I have never set the timing on a HPP valve in my life or could it be something else. Help!! P.S. My float is set at 15mm if that matters, Thanks
style ''n'' mark / philadelphia, PA
Posted Nov 09 2007 11:28PM
I LOOKING TO GET ADVICE ABOUT HOW TO REMOVE A FLYWHEEL OFF MY 70CC DIRT BIKE. IF YOU KNOW ANY WEBSITES PLEASE LET ME KNOW. OR U KNO HOW 2 TAKE 1 OFF U CAN REQUEST ME ALL IS NECCESSARY (BAJA MODEL "06" 70CC)
darrel / stoke on trent, ZZ, UNITED KINGDOM
Posted Dec 17 2007 04:30PM
I'VE JUST PURCHASED A SUZUKI RMX250 1993 P MODLE. ON START UP THERE SEEMS TO BE A NOISEY CLANKING SOUND COMING FROM THE BOTTOM OF THE ENGINE WHERE THE EXHAUST MEETS THE ENGINE. WILL THIS BE THE BIG END BEARINGS? AND CAN IT BE PUT RIGHT BY CHANGING THEM? CAN YOU HELP PLEASE? THANKYOU.
bruce / Orlando, FL, UNITED STATES
Posted Mar 28 2008 04:24PM
I have a 70cc baja sport dirt bike and im looking for a little help. A friend had a small accident on it. Evey since then it has had problems starting, and in a botched attempt to fix it my little brother broke the spark plug. We tried to find another one, we brought the bike to the place we purchased it from and all we got from them was a "sorry we don't carry that model anymore". so we could really use some help.
charles / mayfield, KY, UNITED STATES
Posted Jun 22 2008 03:11AM
i recently bought a baja 70Cc anyway problem is it want idle correctly once started also keeps fouly out plugs everything checks out just will not run properly really bad once ridden and engine is warm any help appreciated thanks
Melissa Johnson / Chapmanville, WV, UNITED STATES
Posted Sep 06 2008 09:22PM
I have a 1992 Yamaha Big Bear 350 4x4 4 wheeler that is running hot. It runs smooth but gets hot under the seat. What kind of cooling system do I have? Do I need to add antifreeze or water?
Eddie / rio rancho, NM, UNITED STATES
Posted Nov 03 2008 10:48PM
how do you put a compression test on a yamaha WR500 92 , I put a guage in the cylinder and cranked the bike like 4 times and the guage only reads 70 psi , this cant be right , I need to know what kind of trans oil to use , and the bike has lost power , and it is running real rich , it started all of this like a week or so ago . I need help
RangerStoner / Fayetteville, NC, UNITED STATES
Posted Aug 02 2009 09:57PM
I have a 2000 ds 200 it keeps blowing out the valve cover plug on the left side of the motor.. What is wrong with this thing and how do i fix this please....
Posted Jul 02 2007 09:32PM